Domestic swimming pool pumps and filters

Previous
Next

Self-priming centrifugal pumps

Thermoplastic injection moulded casing reinforced with glass fibre. Hinged lid closing screws with stainless steel studs and O ring. Noryl impellor inserted with 303 stainless steel. IP 54 rated motor with protection, class F.

  • Connections either Ø50 or Ø63mm socket unions (with imperial adaptors supplied).
  • Suitable for use with salt water.
  • Motor sizes 0.33 – 3 HP single and three phase.


BALEAR series laminated filters – side and top mount

  • Kripsol BALEAR series laminated filters made in polyester finished in an attractive sparkling gloss red.
  • “BL” models: Screw threaded Ø220 mm injection moulded transparent polycarbonate lid with manual air relief valve. Includes pressure gauge, 1½” multiport valve with 400 to 640 diameter connections and 2” multiport valve with 760 and 900mm connections.
  • “BT” models: Fitted with six way 1½” TOP mount valve and pressure gauge.
  • These models are manufactured in diameters of 400, 450, 520 and 640 mm.


Visit the Kripsol website at: www.kripsol.com.es

HCP3800 Series​

  • High capacity pre-filter with Thermoplastic hydraulic body. 
  • Impeller and flange in noryl charged with fibreglass. 
  • MOTOR: IP 55 protection, insulation class F. 50 hz. 2.850 R.P.M. IE3 rated. 
  • MAXIMUM WATER: Temperature 50ºC, maximum pressure 2,5 BAR.  60 Hz available 
  • This pump is suitable to be used with sea water (316 s/s mechanical seal).  90mm/3” connections 
  • Motor sizes 2.5 – 4.5HP single and three phase

Contact us

for more information